My project appears to have halted at 99.211%. It is still sending trickle updates and is using 100% of resource but it hasn\'t moved in about 3 weeks. Any ideas.

Computer ID 592817
Result ID 6956275
Work Unit 6102713
Task hadsm3fub_0242_005910342_1 using hadsm3 version 506


All the best,

Justin

You may have a problem, as you haven\'t registered a trickle since 02 Dec 2007.
This can happen if the model strikes trouble and starts looping.
Each time around the loop it will trickle, but it\'s at the same model point, so it doesn\'t count.

Have a look at the data on the graphics display; if the date, timestep, etc, keep repeating over a period of time, perhaps a day, then it\'s looping, and needs to be Aborted.

I had one of these myself, at about 99% and 1 or 2 trickles to go.

(To see the model data, you need to remove an overlay at the left; press Z, then press 8 to see the count down timer.)

---

Backups: Here

(To see the model data, you need to remove an overlay at the left; press Z, then press 8 to see the count down timer.)

My current model needs to press H first, then Z and 8.