climateprediction.net home page
New Router won't upload zips or update project.

New Router won't upload zips or update project.

Message boards : Number crunching : New Router won't upload zips or update project.
Message board moderation

To post messages, you must log in.

Previous · 1 · 2

AuthorMessage
Profile Dave Jackson
Volunteer moderator

Send message
Joined: 15 May 09
Posts: 4352
Credit: 16,573,397
RAC: 5,582
Message 58035 - Posted: 31 Mar 2018, 7:35:34 UTC - in response to Message 58033.  

Not trying to use two routers at the same time (though the new router was supplied with a lead which had two sockets which would have allowed me to try it.)

Problem occurs both with direct connection and with directly connected lead.

On laptop which has 2 pnw tasks, one sas and one sam task zips for the pnw tasks have uploaded whereas the latest one for the sas50 hasn't. Still waiting for first on the sam25 to be created. I have suspended network activity on laptop so I can easily check the file size to see if that is the problem.

One more thing to try; a cc_config option:

Afraid it made no difference Les.

It is beginning to look like the new router has bad buffer memory that affects large uploads and downloads. It may not be a problem on small files.
Is there an easy way to check the buffer memory on a router?
ID: 58035 · Report as offensive     Reply Quote
Jim1348

Send message
Joined: 15 Jan 06
Posts: 637
Credit: 26,751,529
RAC: 653
Message 58038 - Posted: 31 Mar 2018, 16:59:20 UTC - in response to Message 58035.  
Last modified: 31 Mar 2018, 17:04:52 UTC

It is beginning to look like the new router has bad buffer memory that affects large uploads and downloads. It may not be a problem on small files.
Is there an easy way to check the buffer memory on a router?

Not that I know. The other ready explanation is the firmware, but if you have the latest, there is not much more you can do. If you could borrow another router, I would try that as a test.

But, depending how how risk-prone (and desperate) you are, you could try re-flashing to the old firmware, and then back to the new one again. Flash memory sometimes has stuck bits that might be interfering with the transfers.
ID: 58038 · Report as offensive     Reply Quote
Profile geophi
Volunteer moderator

Send message
Joined: 7 Aug 04
Posts: 2169
Credit: 64,555,907
RAC: 5,858
Message 58039 - Posted: 31 Mar 2018, 17:25:50 UTC

I don't know if this would address the issue, but there is a beta for that model. On the Administration page, Firmware Upgrade tab of the router management GUI for most ASUS routers, if you check the Get Beta Firmware box, you can check for it and upgrade to it if available.

Also, from the ASUS forum for the DSL-AC56U http://vip.asus.com/forum/view.aspx?id=20160304174153203&board_id=11&model=DSL-AC56U&SLanguage=en-us&page=13


DSL ASUSWRT beta firmware v9.1.2.3_473 now available, release note and download link as follows.

https://www.asuswebstorage.com/navigate/s/A5A72B1A648E4DC5BEE94D03033EAEFAY

- [MT751x] DMT Library updated - v5.5.2.9_20171226, fixed Greece ISP G.vector compatibility issues.

- [Enhancement][WiFi][MT7592] Increase Rx sensitivity of CH11/BW40, optimize 2480MHz in-band spur interference.

- [Bugfix][MT751x][SAR] ADSL cannot connect with Annex M mode with PPPoE connection type(probability 50%), due to invalid initial value leads to abnormal SAR uplink speed.

- [Enhancement][DSL] Fine tune Network Map for VDSL Regional Mode.

- [AiProtection][DPI engine][DSL-AC56U/DSL-AC52U/DSL-AC55U] DPI Engine updated - ASUS_2.001_RC23_00023.

- [Bugfix][WiFi][MT7592] Fixed possible PCIE registers tampered after WiFi connection established for a period of time, use lock approach to protect MCU_PCIE_REMAP_2 register.

- [Bugfix][WiFi][MT7592] Fixed possible WiFi MBSSID possible Guest Beacon disappear issue, in the event that dma is busy both hardware and software(main + guest) reset to dma_idle state needed.

- [Bugfix][Multicast] Fixed possible multicast join and leave repeatedly leads to device crash issue.

- [Enhancement][cfg_manager] Support auto WAN switch mechanism.

- [Enhancement][WiFi][MT7592] Refine detect STA inactive algorithm.

- [Bugfix][MT751x][PPPoE-relay] Fixed LAN side clients dialed up via PPPoE experienced poor speed issue, caused by traffic not handled by hw_nat.

- [Enhancement][MT751x] Add Ethernet WAN Link Up/Down info for console/syslog.

- [Enhancement][BOA] Adopt UI login enhancement.

- Fixed various UI related issues.



- ADSL WAN (ATM) QIS manual setting list updated.

Add Turkey ISP TurkNet.

- VDSL WAN (PTM) QIS manual setting list updated.

Add Turkey ISP TurkNet.

Add Mexico ISP Telmex.
ID: 58039 · Report as offensive     Reply Quote
Profile Dave Jackson
Volunteer moderator

Send message
Joined: 15 May 09
Posts: 4352
Credit: 16,573,397
RAC: 5,582
Message 58041 - Posted: 1 Apr 2018, 6:24:23 UTC - in response to Message 58039.  

Thanks George, will try the beta firmware. Overnight had network activity turned off and this morning I saw that the zips going through are just 7.86MB in size compared with 46 and 93 for the failures so it does look like file size is part of the issue. If no joy with firmware will contact ASUS again. - No reply so far.
ID: 58041 · Report as offensive     Reply Quote
Profile Dave Jackson
Volunteer moderator

Send message
Joined: 15 May 09
Posts: 4352
Credit: 16,573,397
RAC: 5,582
Message 58042 - Posted: 1 Apr 2018, 8:26:55 UTC - in response to Message 58041.  

Clicking check for beta didn't find it so I downloaded manually. First attempt said the file was invalid so I downloaded again and this time flashed successfully but the problem remains. Have sent further feedback to ASUS.
ID: 58042 · Report as offensive     Reply Quote
Profile Dave Jackson
Volunteer moderator

Send message
Joined: 15 May 09
Posts: 4352
Credit: 16,573,397
RAC: 5,582
Message 58125 - Posted: 21 Apr 2018, 14:56:40 UTC - in response to Message 58042.  

Another firmware update but getting message that project servers may be off-line so have to wait till more moves on current problems before I know whether there is a fix or not.
ID: 58125 · Report as offensive     Reply Quote
Profile Dave Jackson
Volunteer moderator

Send message
Joined: 15 May 09
Posts: 4352
Credit: 16,573,397
RAC: 5,582
Message 58671 - Posted: 1 Sep 2018, 8:50:47 UTC - in response to Message 58125.  

Another firmware update but getting message that project servers may be off-line so have to wait till more moves on current problems before I know whether there is a fix or not.


Put new router back into the system after having been using old one without wireless and the last firmware update seems to have fixed it. (Or something else has changed in that time that has gotten rid of the problem. - I can't be bothered to revert to previous firmware update to confirm the source of the problem.)

Good to have it working as I can plug usb drives into it for storage and when next year I think fibre is supposed to come to box in street, it will be able to cope with the increased speed.
ID: 58671 · Report as offensive     Reply Quote
Profile Dave Jackson
Volunteer moderator

Send message
Joined: 15 May 09
Posts: 4352
Credit: 16,573,397
RAC: 5,582
Message 58832 - Posted: 5 Oct 2018, 15:54:45 UTC

Or not fixed. most of the time I get a 408 error message when I try and update but only if running BOINC under WINE. native linux client updates normally. Have as a temporary measure put old router back in place. Zips are being uploaded normally now however and it is just the scheduler requests that are the problem.

The fact that WCG works normally and it is only the WINE version that has problems with the new router makes me think tracking this one down is not going to be easy.
ID: 58832 · Report as offensive     Reply Quote
Previous · 1 · 2

Message boards : Number crunching : New Router won't upload zips or update project.

©2024 climateprediction.net